auna Patagonia DAB+ Bedienungsanleitung Seite 32

EN
32
1. Press and hold the Menu Button for 2 seconds to view the main menu.
2. Press TUNING (∧/∨) and Select to choose 'System ' > 'Language'.
3. Press TUNING (∧/∨) and Select to select a menu language.
Carrying out a factory reset
Resetting all presets, stored stations and resets all other options to default
settings.
1. Press and hold the Menu Button for 2 seconds to view the main menu.
2. Press TUNING (∧/∨) and Select to choose 'System ' > 'Factory Reset'.
3. Press TUNING (∧/∨) and Select 'Yes' to reset factory settings. if you do
not want to reset your factory settings, Select 'No'.
DAB settings: You can only see the DAB settings when you have selected
'DAB' as the radio source.
Full scan
You can use the 'Scan' (auto tune) function to automatically scan for new
digital radio stations and remove inactive ones.
To carry out an auto tune:
1. Press and hold the Menu Button for 2 seconds to view the main menu.
2. Press TUNING (∧/∨) Button and Select to choose 'Scan'. The number of
stations will be displayed during the auto tune.
When the auto tune has finished, will tune to the last station that you were
listening to. If the last station you were listening to is no longer available,
will tune into the first station in the alphabetical list.
Manual tuning
To manually check the signal strength of a known channel:
1. Press and hold the Menu button.
2. Press TUNING (∧/∨) button and Select to choose 'Manual tune'.
3. Press TUNING (∧/∨) button and Select to choose the channel.
FM radio settings: You can only see the FM radio settings when you have
selected 'FM' as the radio source.
FM scan
You can choose whether automatically stops at the next available FM
station or the next available FM station with a strong signal when scanning
for an FM station. To change the FM scan setting: