Power Source - auna Patagonia DAB+ Bedienungsanleitung

EN
28

POWER SOURCE

This radio is designed to operate on multiple powered sources. There are
three ways to power the unit.
1. The icon is displayed when the battery is charging. The Charge
indicator lights in RED.
2. When icon is displayed, the battery charge is low and requires
charging.
"DYNAMO" POWER OPERATION
A 3.7 V DC rechargeable lithium battery is included with the product and
comes pre-installed in the unit.
1. Lift the Hand Crank handle outward until it's fully extended. Rotating
the Hand Crank either clockwise or counterclockwise to begin charging
the internal battery. The red CHARGE LED on the front panel will light
red while you are turning the Hand Crank.
2. Continue turning the Crank to generate electricity to charge the battery.
More power is generated the longer you turn the crank handle, and the
Radio listening time will be extended (Radio reception only).
Note: Turn the Hand Crank continuously in a clockwise or counterclockwise
direction at 100-150 RPM (1-2 complete turns per second) to generate
constant power and charge the internal battery. It may require up to
5-6 minutes of cranking if the battery is completely drained and the LCD
clock display and LED light do not work.
3. Press the Power On/Standby button to turn on the unit for operation.
Lithium Battery Safety Instructions
• Use only chargers rated for Lithium cells. Be sure the charger's voltage
and current settings are correct for the battery pack being charged.
hand crank