Parkside PLV 1500 C2 Originalbetriebsanleitung Seite 28

GB
• Read the instructions carefully.
Familiarise yourself with the
controls and how to use the ma-
chine correctly.
• Note that the user is responsible
for any accidents or risks to oth-
ers and their property.
• The implement is not suitable for
use by children.
• Never start up the implement
while other people, but espe-
cially children and domestic
pets, are in the vicinity.
• Check the area on which the
implement is to be used. Re-
move all stones, sticks, wire and
other foreign bodies that could
be caught up and fl ung out.
Never use the implement to
level out uneven patches.
• Always wear appropriate pro-
tective work clothes and fi rm
shoes with non-slip soles, strong
long trousers, ear defenders
and goggles. Never operate the
implement while bare footed or
when wearing open sandals.
Avoid wearing loose clothing
with hanging cords or ties.
The protective devices and your
personal protective equipment
will protect yourself and other
people and ensure that the equip-
ment can be smoothly operated.
• Never operate the implement if it
is damaged, incomplete or has
been modifi ed without the con-
sent of the manufacturer. Never
work with damaged or missing
protective devices (e.g. starting
lever, unlocking knob, impact
protector). Never disengage pro-
tective devices (e.g. by tying the
starting lever).This ensures that
28
the equipment remains safe.
• Before starting the equipment, en-
sure that no objects or branches
are pushed into the blade open-
ing, that the equipment is stand-
ing stably and that the work-
space is tidy and not blocked.
Check the condition of your ex-
tension cable and the connect-
ing cable of your equipment.
Use the necessary protective
equipment. There is a risk of
injury.
• If your equipment vibrates or
emits unusual noises when
switched on, disconnect the
plug from the socket and check
the cutting cylinder. Ensure that
no remains of chopped matter
are blocking the cutting cylinder
or jammed between the blades.
If you fi nd no problems, return
the equipment to a customer
service centre.
• If the blades no longer cut cor-
rectly or if the motor is over-
loaded, check all the parts of
your equipment and replace the
worn parts. If a more extensive
repair is required, contact a
customer service centre.
• Use the machine in the recom-
mended position and on a
solid, fl at surface only.
• Do not operate the machine on
paved or gravelled areas where
material fl ung out can cause
injuries.
Use:
• CAUTION – A very sharp tool.
Avoid cutting your fi ngers or
toes. While working always
keep your feet and fi ngers well