Safety Precautions; Symbols Used In The Manual; Symbols On The Implement - Parkside PLV 1500 C2 Originalbetriebsanleitung

GB
Depth adjustment .......................... 5-way
...................................(-3/-6/-9/-12 mm
.....................+ transport position 10 mm)
Volume collection bag....................... 50 l
Weight (incl. accessories) approx. 11.5 kg
Acoustic pressure level
) .................. 74.5 dB; K
(L
pA
Sound power level (L
Measured .........94.5 dB; K
Guaranteed .............................. 98 dB
) ..... 1,239 m/s
Vibration (a
n
The noise and vibration values were estab-
lished by the standards and stipulations
listed in the Conformity Declaration.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the op-
erating cycle are to be considered,
including, for example, times during
which the power tool is turned off
and times when the tool is turned on
but is running idle).

Safety precautions

This section covers the basic safety
instructions when working with this
implement.
26
= 2.54 dB
pA
)
WA
= 2.54 dB
WA
, K= 1,5 m/s
2

Symbols used in the manual

Warning symbols with
information on damage
and injury prevention
Instruction symbols with infor-
mation on preventing damage
Pull out the mains plug.
2
Wear gloves when handling
the roller.
Help symbols with information
on improving tool handling

Symbols on the implement

Caution!
These Instructions must be
read.
Danger of injury due to
fl ung-out material! Keep by-
standers well away from the
implement.
Danger of electric shock
if the power cable is dam-
aged! Always ensure that
the power cable is kept well
away from the implement
and its cutting tools.
Wear eye and ear
protection.
Caution! - Sharp tools.
Ensure that the hands and
feet are kept well away
from the cutting tools. The
cutting cylinder continues to
rotate briefl y after the motor