Resetting The Unit - Sharp EL-1607P Bedienungsanleitung

WARNING
THE VOLTAGE USED MUST BE THE SAME
AS SPECIFIED ON THIS CALCULATOR.
USING THIS CALCULATOR WITH A VOLTAGE
H I G H E R T H A N T H AT S P E C I F I E D I S
DANGEROUS AND MAY RESULT IN A FIRE
OR OTHER TYPE OF ACCIDENT CAUSING
DAMAGE. SHARP WILL NOT BE HELD
R E S P O N S I B L E F O R A N Y D A M A G E
R E S U LT I N G F R O M
CALCULATOR WITH OTHER THAN THE
SPECIFIED VOLTAGE.

RESETTING THE UNIT

Strong impacts, exposure to electrical fields, or
other unusual conditions may render the unit
inoperative, and pressing the keys will have no
effect. If this occurs, you will have to press the
RESET switch on the bottom of the unit. The
RESET switch should be pressed only when:
• an abnormal event occurs and all keys are
disabled.
• you install or replace the battery.
U S E O F T H I S
13
Notes:
• Pressing the RESET switch will clear the stored
tax / discount rate and conversion rate, other
data stored in the memory.
• Use only a ballpoint pen to press the RESET
switch. Do not use anything breakable or
anything with a sharp tip, such as a needle.
• After pressing the RESET switch, connect the
power supply plug to an outlet. Turn the power
switch "ON" and check that "0." is displayed.