Listening To The Fm Radio; Listening To The Dab - THOMSON RT225DAB Anleitung

Listening to the FM Radio

1) Select the RADIO mode with the "STANDBY / FUNCTION" button, until "FM" is shown in the display.
2) For FM reception: Completely extend the telescopic antenna. Change its position to improve the
reception.
3) There are two options to search for and preset radio stations.
• Automatic scan:
Important! Any preset radio stations will be overridden.
Press and hold the "SCAN / MODE" button for approx.3 seconds. The system scans the entire
frequency band for radio stations. Any stations found will be preset from lowest to highest frequency.
• Manual scan for audio stations:
Briefly press the "SCAN+" & "SCAN-" buttons, until you have found the radio station which you are
looking for. If you keep one of the buttons pressed down, the device will search to the previous,
respectively next radio station.
• Preset station:
1) Press and hold the "SCAN / MODE" button on unit for about 2-3 seconds to start the automatic
preset process.
2) Display will show the memory sequence number and radio stations will be automatically preset
into the sequence number (Note: Each sequence number means 1 preset station while during
automatic preset process.)
3) Once all the stations were automatic preset, press the "PRESET" button to choose preset stations.
4) Press "SCAN+" or "SCAN-" button to choose the radio station.
5) Press "ENTER / CLOCK" to confirm.
• Manual Preset
1) Use the Automatic scan or Manual scan, until you have found the radio station which you are
looking for.
2) Press "SCAN / MODE" button.
3) Press "SCAN+" or "SCAN-" button to choose the preset station.
4) Press "CLOCK / ENTER" button to confirm.
• Favourite Station Presets
Press one of the direct selection buttons(hot keys) (1 - 3) to play the Preset station 1, 2 or 3.
• Info display
Press the "INFO / MENU" button to show the FM information.
• FM Menu
In FM mode, press and hold the "INFO / MENU" button to enter the FM menu. Press "SCAN+" or
"SCAN-" buttons to choose the following FM menus and confirm with "ENTER / CLOCK" button:
- Scan setting: Select the desired option for automatic station search.
• All stations: Search for all stations that can be received. In this case, station search also stops
for weak stations.
• Strong stations only: Only clear stations are searched.
- Audio setting: Select the MONO or STEREO for FM reception.
- System
• Time
• Language
• Factory Reset
• SW version

Listening to the DAB

Select the DAB mode with the "STANDBY / FUNCTION" button, until "DAB" is shown in the display.
The radio will automatically do a full scan of DAB+ stations. The list of stations is then stored, eliminating
the need for another full scan when the radio is turned on next time. When the scan is complete, the
stations are stored in alphabetical order. The first available station will be played back.
- EN 6 -