Package Contents; Description (Fig. A); Assembly And Adjustments - DeWalt XR LI-ION DCH033 Bersetzt Von Den Originalanweisungen

Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other
e
than the designated D
D WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCH033 and DCH133 operate on a 18 volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCB546, DCB547, DCB547G, DCB548. Refer to
Technical Data for more information.

Package Contents

The package contains:
1 Heavy-duty rotary hammerdrill
1 Side handle
1 Depth adjustment rod
1 Li-Ion battery pack (M1 model)
2 Li-Ion battery packs (M2 models)
1 Instruction manual
1 Battery charger (Kitted models)
1 TSTAK box (Kitted models)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
WALT batteries with a
e
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. B)
The date code, 17 which also includes the year of manufacture,
is printed into the housing.
Example:
2023 XX XX
Year of Manufacture

Description (Fig. A)


WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Battery pack
1
Battery release button
2
Side handle
3
Forward/reverse control
4
button (Lock-off button)
Trigger switch
5
Mode selector dial
6
Intended Use
Your heavy-duty cordless rotary hammerdrill is designed
for professional concrete drilling, screwdriving and
chiseling applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
Your heavy-duty cordless rotary hammerdrill is a professional
power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
EnGLIsh
Mode selector release
7
button
Depth rod
8
Depth rod adjust button
9
Main handle
10
SDS plus® tool holder
11
33