Completing The Installation; Anti-Tipping Safety Assembly - KitchenAid Vertigo Einbau Serie Installationsanleitung

6. COMPLETING THE INSTALLATION

6.1 Anti-tipping safety assembly

To prevent the appliance from tipping over
an extra-long kit is vailable up on request
if the appliance needs to remain distanced
from the wall, it is mandatory to install two
brackets on the upper part of the appliance
for fixing it securely to the wall.
Operate as follows:
> The brackets should be applied as illustrated us-
ing the provided screws and expansion plugs.
Place a bracket on the top of the appliance in corre-
spondence to the fixing holes and against the wall
[ 1 ].
" )
⁄
1
1 4 5 (
> Mark up the holes position on the wall
2
>
Drill the wall with an 8 mm (3/8") bit and insert
[ 3 ].
the expansion plug
3
> Reposition the bracket and fix it first to the cabi-
net and then to the wall
4
To avoid danger of the appliance tipping over
it is mandatory to secure the appliance to
2 x
the wall by means of two special brackets.
6 x
[ 2 ].
[ 4 ].
25
EN