KitchenAid Vertigo Einbau Serie Installationsanleitung Seite 22

5. INSTALLATION
> Move at the back of the appliances to mount the
joining brackets: fix on side of the top and lower
brackets to one of the appliances and subsequently
[ 2 ].
to the other
2
> Place the two units side by side and join them at
the front attaching the two profi les with the sup-
[ 3 ]
plied screws . Attach the bracket on top of the
[ 4 ].
units as per figure
3
>
Finish off by mounting the central cover frame
onto the central profiles, by pushing it until a click
[ 5 ].
is heard
5
>
Once completed the previous steps, push the
units in their final position
If the units are to be installed inside a niche or
within an enclosed structure, it is necessary to de-
sign a ventilation shaft at the back of the niche to
22
4
[ 6 ].
assure proper ventilation at the back of the unit of
about 20mm. Always mount front panels on door
and drawer before pushing the unit into its final po-
sition inside the niche or structure.
>
Check the levelling of the appliance, adjusting its
feet and wheels to correct it.
> Secure the appliance to the adjacent cabinets by
fixing to these the side profiles previously mounted
on the appliance [ 7 ]. To make this operation easier
keep the door and the drawer open.
6
> Mount the covering frames onto the profiles, first
insert them laterally and then push firmly until a
"click" is heard [ 8 ].
7
8