4.6 Mounting the handles
Handles will have to be mounted on the
panels before they are applied to the
fridge.
Operate as follows:
>
Drill two holes on the back of the panels accor-
ding to the table below
1
>
Place the handle on top of the holes and in-
sert the screws through the panel and into the
handle support
[ 2
].
2
[ 1
].
4.7 Mounting panels to the door and
the drawer
Once all brackets and small brackets
have been applied to the panels, you can
begin installing the bottom drawer.
Operate as follows:
>
Partially tighten the screw to the fixing
1
>
Hook the bottom drawer panel starting from the
fixings on the bottom
[ 2
2
[ 1
].
].
19
EN