Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. PANELS MOUNTING
>
Following the corresponding table, mark the
external and then the internal hole
3
>
Position the brackets on each set of marks to
make sure they are aligned
through the panel (pay close attention to the pa-
[ 5
].
nel's thickness)
4
>
Screw the brackets in place
5
Drawer Panel
>
When preparing the Drawer Panel, follow the
same instructions as per the door panel, but
make sure measurements are taken starting
from the top edge
[ 7
].
The support bracket faces the opposite way
(note imgs 4 and 8).
14
[ 3
].
[ 4
], then drill holes
[ 6
].
6
[ 8 ]
7
8
Werbung
Inhaltsverzeichnis
