E) Basic Functions Of The Operating Buttons; F) Pushing On/Turning/Taking Off Clip - Renkforce 1298781 Bedienungsanleitung

e) Basic Functions of the Operating Buttons

• Briefly pushing the button „M" (6) switches between video mode, photo mode
and photo playback mode.
• When the surveillance camera is on, you can start or end a video recording in
video mode by briefly pushing the button „OK" (8) if a memory card has been
inserted.
In photo mode, the surveillance camera will record a picture by briefly pushing
the button „OK" (8).
If the button „OK" (8) is pushed for an extended period, the setup menu appears
in the display (only possible if no video recording is currently running).
• The buttons „
settings in the setup menu or selection of a video or photograph in playback
mode.
• The button „
menu.

f) Pushing on/Turning/Taking off Clip

• If the small clip is enclosed separately, push it into the respective slot at the
rear of the surveillance camera.
• The clip can be turned by 360°, so that the surveillance camera can be attached
very well in many locations.
• If the clip is to be removed, turn it up.
Then push the small unlocking button (see hand symbol
on the right) and pull out the clip.
46
" (7) and „ " (9), for example permit changing functions or
" (10) serves, e.g., to leave a function or setting in the setup