Renkforce 1298781 Bedienungsanleitung Seite 54

Setting video length („Video length")
• Use the buttons „
is to be saved and a new one started. You can choose 30 seconds, 1, 3, 5, or 10
minutes.
The surveillance camera will set up a new file per interval when the set
video length is exceeded.
For example, if you set 1 minute and you record a video of 5 minutes,
you will have 5 separate video files with a length of 1 minute each on
the memory card.
• Press the „OK" button (8) to confirm.
Switching the overwrite function on/off („Recycle Record")
• Here, you can use the buttons „
oldest files are to be overwritten when the memory card is full.
When the motion sensor is switched on, its recorded videos are not
overwritten!
• Press the „OK" button (8) to confirm.
Record audio („Record Audio")
• In this function, you can use the buttons „
video is recorded with or without sound.
• Press the „OK" button (8) to confirm.
Display time/date („Date Stamp")
• Use the buttons „
displayed in the video or not.
• Press the „OK" button (8) to confirm.
54
" (7) and „ " (9) to set the interval for when a video file
" (7) and „
" (7) and „ " (9) to select if the time and date are to be
"(9) to select if the respective
" (7) and „ " (9) to set if the