Renkforce 1298781 Bedienungsanleitung Seite 49

Switching the password function on/off, changing the password („Password")
• Use the buttons „
to be switched off or on.
When the password function is on, a 4-digit code (can be chosen
freely between 0000 and 9999) must be entered when calling the setup
menu.
• If you want to use a password, you can choose it between „0000" and
„9999".
Use the buttons „
„9"; the button „OK" (8) moves the input position by one digit.
When all 4 digits have been programmed (e.g. with the password „1 2 3 4"),
push the button „OK" 8) again for confirmation.
If the password is entered incorrectly 3x, the surveillance camera locks
access to the setup menu for one day.
Selecting internal/external memory card slot („Data Storage")
• Use the buttons „
the external memory card slot.
• Press the „OK" button (8) to confirm.
" (7) and „ " (9) to select if the password function is
" (7) and „ " (9) to programme a number from „0" to
" (7) and „ " (9) to choose between the internal and
49