Before Use; Instructions - Panasonic ES-EY90 Betriebsanleitung

Before use

Removing and attaching the
head
Push and hold the head release
button to remove the head and
push it until it clicks� (Fig� 3)
Bikini comb
ES-EY90
Place the bikini comb onto the
shaver head and slide trimmer
up� (Fig� 4)
• Once in place, make sure the bikini
comb is in close contact with the skin.
Removing and attaching the
scrub brush (Fig� 5)
ES-EY90/EY80
<Removing>
Holding the brush by its side, remove
from the brush head.
<Attaching>
Press firmly until it clicks.
<LED light> (Fig. 6)
The LED light glows and remains on
when the power is on.
This product has a built-in pressure
sensor, and the LED light blinks if you
press too hard against your skin.
<Mode selector> (Fig. 7)
• There are 3 disc rotation speeds. Try
SOFT mode to avoid irritation when
removing hairs.
• Press the power switch to switch
between ●(SOFT), ●●(NORMAL),
●●●(POWER) and "OFF".
• Select POWER mode when using the
foot care head.
●: SOFT
The disc rotates at low speed.
• 1 Mode lamp glows blue.
●●: NORMAL
The disc rotates at standard speed.
• 2 Mode lamps glow blue.
●●●: POWER
The disc rotates at high speed.
• 3 Mode lamps glow blue.
OFF
• Turns the appliance OFF.
<Low battery level>
• The charging indication/notification
] blinks once a second.
light [
L
• Operating time varies depending on
usage and temperature after the
charging indication/notification light
blinks.

Instructions

Epilation head
The fast cap and gentle cap for legs/
arms should be used only for legs/arms.
The sensitive area cap and small epilation
head for underarms/bikini-line should be
used only for underarms/bikini-line.
Areas suitable for epilating (Fig� 8)
A. Use the fast cap and gentle cap for
legs/arms.
B. Use the sensitive area cap or small
epilation head for underarm/bikini-line.
Before bikini-line hair removal, put on
your swimwear or underwear and
check the areas you wish to epilate.
• Using the epilator on non-
recommended areas may cause pain
or skin trouble.
15