Carbon Filter (Usage Without A Flue); Troubleshooting - Beko BHCB66641BBHS Bedienungsanleitung

5.4 Carbon Filter (Usage without a
flue)
General warnings
• If you have installed your product
without a flue, you should replace your
carbon filters every 4 months in normal
use. You can obtain the carbon filter
from Authorized Services.
• The carbon filter should never be
washed.
• If you do not follow the rules for cleaning
and replacing the filters of your hood,
you may cause a fire.
Removing carbon filter
1. Remove the aluminium filters.
2. Release the locks of the carbon filter
from their slots (1).

6 Troubleshooting

If the problem persists after following the
instructions in this section, contact your
vendor or an Authorized Service. Never try
to repair your product yourself.
Product is not working.
• Fuse may be faulty or blown. >>> Check
the fuses in the fuse box. Change them if
necessary or reactivate them.
• The product may not be plugged in. >>>
Check if the product is plugged in to the
outlet or not.
• The speed button may not be set. >>>
Press/touch the desired speed button.
3. Remove the pins on the other end of the
carbon filter from its socket and pull it
out in the direction of the arrow (2).
4. Reverse this process, first insert the
tabs into the slot of the new carbon fil-
ter and then push the locks upwards.
5. Install the aluminium filters.
• No electricity. >>> Ensure the mains is
operational and check the fuses in the
fuse box. Change the fuses if necessary
or reactivate them.
Hood light is not on.
• Hood lamp may be faulty. >>> Contact
your local dealer where you purchased
your product or the Customer Service,
and ensure that the lamp is replaced.
• No electricity. >>> Ensure the mains is
operational and check the fuses in the
fuse box. Change the fuses if necessary
or reactivate them.
EN / 17
EN
DE
FR
NL