Mode Selection; Master/Slave Mode - Cameo PAR 56 CAN Bedienungsanleitung

MODE SELECTION:

Programmes
STATIC COLOUR MODE:
Press the mode button and use the up and down buttons to select one of the 7 desired
colours. 1, Red 2, Green 3, Blue 4, Yellow 5, Cyan 6, Purple 7 White
COLOUR CHANGING MODE
Press the mode button to select the Colour Change programme. The unit will then run in Colour
change mode. Press the up and down buttons to select the colour change speed from 0-99.
COLOUR FADING MODE
Press the mode button to select Fade mode. The unit will then run in colour fade mode. Press
the up and down buttons to select the fade speed from 0-99.
AUTO RUNNING MODE
Press the mode button to select Auto mode. The unit will then run automatically through all
of the built-in programmes. The run speed can be pre-set via the speed of the colour change
and colour fade modes.
SOUND ACTIvE MODE
Press the mode button to select sound mode. The unit will then run via the sound. Press the
up and down buttons to adjust the sound sensitivity levels.

MASTER/SLAvE MODE

Link the units together and press the mode button of the slave units to SLA mode. The slave
units will follow in sequence with the master unit.
8