Product Description; Product Components - Fig; Installation - SOMFY DEXXO PRO RTS Installationsanleitung

EN

2 - PRODUCT DESCRIPTION

2.1 Product components - Fig. 1

Key Number Description
1 1 Motor head
2 1 Motor cover
1 Upper cover
1 Lintel bracket
1 Door bracket
2 Ceiling bracket
7 2 Motor head bracket
1 Manual release cord
1 Link arm
10 1 Travel stop
11 Chain retainer pad
12 1 Power cable
2
17 2 Circlips
20 2
21a 1 Single part rail
21b 1 Two part rail
21b1 1 Sleeve
21b2
22 2
1 Bracket
2
2.2 Scope of application - Fig. 2
Types of doors (Fig.2)
A
B
-
exceeds 10 sq. metres
-
C
-
a belt transmission rail
-
-
-
-
D
E
-
-
technical department.
Door dimensions (Fig. 3)
-
-
Fig. 5 )
- By cutting the link arm to size.
Fig. 7 ).

3 - INSTALLATION

3.1 Installation height - Fig. 4
-
the ceiling.
-
3.2 Detailed description of installation steps -
Fig. 5 to 15
Mounting the lintel bracket and the door bracket (Fig. 5)
by up to 200 mm max (Fig. 5- ).
Assembling the two part rail (Fig. 6)
[1]. [2]. [3].
Ensure that the chain or belt is not twisted.
[4].
[5]. Mount the complete assembly using the eight mounting screws.
[6]. Tighten the nut to tension the chain or belt. The compressed rubber must
mounting screws.
Fitting the rail onto the motor head (Fig. 7)
Fitting to the lintel bracket (Fig. 8)
Ceiling mounting
Fig. 9).
It is possible to add mounting points at the motor head level (Fig. 9-
- mount the system at the motor head (Fig. 10-
- mount the system at the rail (Fig. 10-
(Fig. 10- ).
Fitting the arm onto the door and the trolley (Fig. 11)
In case the handle release system is positionned greater height than
1,80 m, it will be necessary to lenghten the cord to make it accessible
to all end-users.
[1].
[2]. Bring the trolley up to the door.
[3]. Attach the arm to the door bracket and the trolley.
Adjusting and fastening the opening travel stop (Fig. 12)
[1].
release mechanism and bring the door to the open position.
At this step, make sure that the cord from the manual release system
could not be caught afterwards in a prominent part of the vehicule
(i.e. roofbars).
travel stop.
[2].
[3]. Position the travel stop against the trolley.
[4]. Moderately tighten down the mounting screw.
Dexxo Pro RTS
).
a
)
b )