SOMFY DEXXO PRO RTS Installationsanleitung Seite 31

Dexxo Pro RTS
Partial operating mode
Values 0: sequential
Comments
movement taking place and the timed close.
Closing speed
Values
to
By default, 6: approx. 12 cm/s
Comments
to be carried out again.
detection complies with annex A of the standard EN 12 453.
Non-observance of this instruction can result in serious injury to persons,
e.g. when trapped by a door.
Partially open position
Values Storing the position as illustrated in Fig. 32.
Values
1: standard (over approx. the last 30 centimetres)
detection complies with annex A of the standard EN 12 453.
Non-observance of this instruction can result in serious injury to persons,
e.g. when trapped by a door.
Opening speed
Values
to
9: fastest speed: approx. 18 cm/s
Choice of operating direction (type of door)
Values 0: direction 1: all types of doors except swinging doors
Comments
WARNING
WARNING
Maintenance required indicator
Values 0: no indication
to
Comments
signal that maintenance is required.
must be deactivated.
Detection of forced entry
Values 0: no detection of forced entry
Comments
the door is closed.
Safety action prior to opening (safety ADMAP)
Values
Comments
door opening.
Safety action during closure
Values
3: fully reopen
Comments
input.
Obstacle detection action during closure
Values
3: fully reopen
Total operating mode automatic timed close
Values
2:20 s
Lighting time delay
Values
6:60 s
Partial operating mode automatic timed close
Values
2:20 s
Programming example:
Setting up a long soft stop function zone"P7" = 2.
EN
P7