Handset Illustration
Receiver
Up / Down
Soft key
Broadcast
Talk / Flash
Microphone
Antenna
Display
Soft key
End / Power Off
Intercom
Dialing key
~11~
Handset Features
Basic Handset Features
1. 4-line LCD (Liquid Crystal Display)
a. The LCD display has LED (Light Emitting Diode) for backlighting.
st
b. The 1
line of LCD consists of icons.
c. Icons explanation from left to right
(1)
RSSI level (Receive Signal Strength Indicator)
During a call, the number of bars is proportional
to the radio signal strength received.
(2)
Link mode
(2.1) Call in-progress (ON/OFF-Hook)
The number on the right side of phone symbol
indicates which the phone line of Base Station
is active if Multi-Base is on.
(2.2) Intercom in-progress
Indicates if Intercom mode is active
Indicate the Handset ID which is making intercom with.
(3)
Speech mode
(3.1) Speaker Indicator
Indicate if the speaker is active
(3.2) Headset mode
(4)
Sound and Indication
(4.1) Enable ringer
(4.2) Disable ringer
(4.3) Ringer and vibrate mode
(4.4) Vibrate mode
(4.5) Message waiting indicator
(5)
Disable PA
Indicate if the incoming broadcast is disabled.
Two-Digit Handset ID
(6)
Displays the 2-digit Handset ID of own.
11
Battery Strength
(7)
Number of bars is proportional to the amount of battery time remaining.
nd
rd
d. The 2
and 3
lines of the LCD, maximum 16 characters each,
display status, message, menu selections, or user-editable
alphanumerical characters.
e
The last line displays the left and right soft keys.
~12~