Pkm BS38-60ABPH Bedienungsanleitung Seite 82

P
OSSIBLE CAUSE
1. One-way valve is leaky.
1. Motor not properly fixed.
2. Hood not properly fixed.
1. Too much distance hood-hob.
2. Too much draught because of open
doors and/or windows.
1. Screws are not firmly tightened.
2. The mounting bracket / mounting
plate is not fixed firmly.
If the appliance has a malfunction not noted on the schedule or if you have checked
all items on the schedule but the problem still exists, please contact the shop you
purchased the appliance at.
I
F THE HOOD DOES NOT WORK PROPERLY AND
INCREASED OPERATING NOISE
➢ Incorrect dimension of the air duct.
➢ Obstruction in the air duct.
➢ The diameter of the air duct from hood to wall-box inclusive should be 120 mm;
otherwise, the capacity of the motor may be decreased.
M
ALFUNCTION
S
MEAR OF OIL
T
HE APPLIANCE VIBRATES
I
NSUFFICIENT EXTRACTING CAPACITY
T
HE APPLIANCE IS UNSTABLE
I
N EXTRACTION MODE
M
.
1. Seal the valve.
.
1. Fix motor properly.
2. Fix hood properly.
1. Lower position of hood.
2. Close the doors/windows.
.
1. Tighten the screws.
2. Fix the mounting
mounting plate properly.
/
OR YOU CAN HEAR
,
CHECK THE SCHEDULE BELOW
82
EASURE
.
bracket
.
/