Replace the
MAINTENANCE
C
ARBON FILTERS
➢ Type name of the
WARNING! Switch off the appliance and disconnect it from the mains
before you install any carbon filters (use the relevant fuse in your household
fuse box).
1. Lift the glass cover (A) of the extractor hood to open the appliance (s. fig. below,
direction of arrow).
2. Remove the aluminium grease filter: press the locking button (B) on the handle
(C) of the grease filter (D) to release the grease filter from its lock (s. fig. below).
Then remove the grease filter (D).
Behind the grease filter is the motor of the appliance. The carbon filters are installed
on the motor.
CARBON FILTERS
).
for your extractor hood are optionally available.
You can order the
www.pkm-online.de
CARBON FILTERS
H
OW TO INSTALL THE CARBON FILTERS
regularly (see also chapter C
CARBON FILTERS
: See chapter T
67
LEANING AND
at
ECHNICAL DATA