Pkm BS38-60ABPH Bedienungsanleitung Seite 75

❖ Do not use any abrasive detergents!
❖ Do not use any alkaline dishwasher-detergents! (pH more than 7).
C
LEANING INTERVAL FOR ALUMINIUM GREASE FILTERS
➢ Every 2 - 3 weeks according to the frequency of use of the extractor hood.
H
OW TO DEINSTALL
1. Lift the glass cover (A) of the extractor hood to open the appliance (s. fig. below,
direction of arrow). Behind the glass cover is the aluminium grease filter.
2. Press the locking button (B) on the handle (C) of the grease filter (D) to release the
grease filter from its lock (s. fig. below). Then remove the grease filter (D) and clean
it as described in this chapter.
A
B
C
D
3. To reinstall the cleaned aluminium grease filter, insert the grease filter properly into
the corresponding slots on the extractor hood. Press and hold the locking button
(B) on the grease filter handle (C) while pushing the grease filter into its proper
position. Once the grease filter is properly in position, release the locking button (B)
to lock the grease filter in place (s. fig. below).
/
INSTALL THE ALUMINIUM GREASE FILTERS
G
LASS COVER OF THE EXTRACTOR HOOD
L
OCKING BUTTON OF THE GREASE FILTER
H
ANDLE OF THE GREASE FILTER
A
LUMINIUM GREASE FILTER
75