Pkm BS38-60ABPH Bedienungsanleitung Seite 69

5. Repeat the procedure on the other side of the motor.
6. If you want to uninstall the
remove them.
7. Reinstall the aluminium grease filter: insert the grease filter properly into the
corresponding slots on the extractor hood. Press and hold the locking button (B) on
the grease filter handle (C) while pushing the grease filter into its proper position.
Once the grease filter is properly in position, release the locking button (B) to lock
the grease filter in place (s. fig. below).
8. Lower the glass cover (A) of the extractor hood carefully to close the appliance (s.
fig. below).
A
B
C
D
WARNING! Install the carbon filters safely and properly; otherwise, the
carbon filters can loosen and cause hazardous situations.
WARNING! Operate the appliance with inserted grease filters only.
Otherwise, recirculating-transported fat will deposit in the appliance and the
exhaust system. RISK OF FIRE!
NOTICE! The suction capacity is decreased by installed carbon filters.
CARBON FILTERS
G
LASS COVER OF THE EXTRACTOR HOOD
L
OCKING BUTTON OF THE GREASE FILTER
H
ANDLE OF THE GREASE FILTER
A
LUMINIUM GREASE FILTER
69
, turn the filters anti-clockwise and