Pkm WA8-ES1416 DAI Bedienungsanleitung Seite 152

E
RROR CODE
➢ Water is overflowed.
E 4
➢ The electric motor is
E 5
➢ The heater is defective.
E 6
➢ The temperature sensor
E 7
➢ Mismatching software /
E 8
➢ Communication failure.
E 9
➢ Inverter failure.
E 10
➢ The
E P
If you have checked all items on the table above but the problem still exists, please
contact the aftersales service.
P
OSSIBLE CAUSE
defective.
is defective.
hardware on the main
board and frequency
inverter board.
current washing
programme does
correspond to
washing programme set
with the rotary knob.
~
( )
S
➢ The water level is automatically
increased until the water level is
suitable for the washing cycle.
➢ If the problem cannot be
solved, switch off and unplug
the appliance, close the water
tap and contact the aftersales
service.
➢ Switch off and unplug the
appliance, close the water tap
and contact the aftersales
service.
➢ Switch off and unplug the
appliance, close the water tap
and contact the aftersales
service.
➢ Switch off and unplug the
appliance, close the water tap
and contact the aftersales
service.
➢ Switch off and unplug the
appliance, close the water tap
and contact the aftersales
service.
➢ Switch off and unplug the
appliance, close the water tap
and contact the aftersales
service.
➢ Switch off and unplug the
appliance, close the water tap
and contact the aftersales
service.
➢ Turn the rotary switch to the
not washing
the corresponds to the washing
programme currently running.
~
152
M ( )
EASURE S
programme that