Set the security mode (WPA, WPA2, WPA and WPA2) and enter a pre-
shared key. You can also create a key that ensures very strong security.
Here too, it is possible to activate the DHCP service for the WLAN network. In
addition, you can use a slider to enable the default port filtering rules for the
Wi-Fi network.
If you want to create the wireless network later, you can skip this step.
Step 6.2: WLAN with Bridge
If you have activated the bridge mode for the internal network (step 3) or the
DMZ network (step 5), you only need to enter the country code, the SSID and
SSID broadcast, the security mode and the pre-shared key.
- 42 -