Factory Settings - Securepoint RC100 G5 Installationsanleitung

3 Factory Settings

You can access the Securepoint appliance with your web browser via the IP
address of the internal LAN 2 interface on port 11115 using the HTTPS (SSL)
protocol. This IP address is factory set to 192.168.175.1.
Open the web interface of the Securepoint Appliance:
https://192.168.175.1:11115
Note:
Use a current browser to administer the NextGen UTM or the VPN gateway.
You should use a PC with at least a Pentium 4 processor, 1.8 GHz or higher,
and 512 MB or more memory for the web interface.
Reset to factory setting:
In the Web interface of the system, you can reset the appliance to the factory
settings. In the Configuration menu, click Factory Settings. The existing
configuration is overwritten.
The second way to reset the appliance to factory settings is the reinstallation
using an USB image via USB stick. You will find the image in our reseller
11 12
portal and a how-to in our Securepoint Wiki. Please always use the latest
version of Securepoint UTM for this method.
13
The third variant is via the Command Line Interface (CLI). Please note that
there is no security query here and all other configurations no longer exist
after a restart.
All variants are also available in our Wiki.
14
https://wiki.securepoint.de/UTM/CONFIG/Werkseinstellungen
- 33 -