Securepoint RC100 G5 Installationsanleitung Seite 39

Step 3: Internal
Enter the desired IP address of LAN 2 (internal network) and the netmask
(network size, eg network mask in bitcount format: /24, 255.255.255.0) of the
gateway.
The top slider can be used to enable the DHCP service for the internal
network.
If your appliance has a wifi module, the lower slider can be used to generate a
bridge to the internal network via WLAN.
Alternatively, in step 5, a bridge can be made with the DMZ network.
Step 4: Internet
Select the type of your Internet connection.
You have four options to create an Internet connection: DSL, VDSL, router, or
cable modem connection. After the basic configuration, additional options are
available via the Network menu under the item Network configuration.
- 39 -