Exodraft RBV1 Montageanleitung Seite 36

36 • UK
4.5.7 Installing the RBV1 on a brick chimney
NOTE
The supplied steel wire must always be securely fastened both to the RBV1 and to the chimney. Begin by
attaching the wire bracket to the chimney, tighten the loop, and clamp down the wire lock. The wire is
tightend in a downward direction - enough to secure that the RBV1 stays on the chimney, but not so tight
that it makes the fan tilt.
3200977-RBV1-DK-SE-NO-UK-DE
6
8
5