Exodraft RBV1 Montageanleitung Seite 35

3200977-RBV1-DK-SE-NO-UK-DE
4.5.5 Placement
The RBV1 must always be mounted in a vertical position. DO NOT INSTALL HORIZONTALLY!
4.5.6 Installing the RBV1 on a steel chimney
NOTE
The supplied steel wire must always be securely fastened both to the RBV1 and to the chimney. Wrap the
wire around the chimney and through the wire lock.Tighten the wire in a downward direction and tighten
the wire lock. The wire must be tight to secure that the RBV1 stays on the chimney, but not so tight that it
makes the fan tilt.
35
UK •
7