Intended Use - Hilti Nuron VC 10L-22 Original Bedienungsanleitung

▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
→ page 36
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
3 Description
3.1 Product overview
3.2

Intended use

The product described is a cordless dust extractor and is designed for the commercial sector, e.g. for use
on construction sites, in hotels, schools, hospitals, factories, stores and offices, and by rental companies. It
is designed for applications in the wet and dry sectors.
Use of the product to clean down persons or animals is not permissible. Underwater use is not permissible.
This product is approved for the Hilti SafeSet application.
▶ Before beginning work with the product, find out how to operate it correctly and about any hazards
associated with the materials you will be working with and how these materials can be disposed of safely.
▶ Do not use the product for continuous, stationary operation in automatic or semi-automatic systems.
▶ To reduce the risk of injury, use only genuine Hilti accessories and accessory tools.
▶ Use an anti-static suction hose in order to avoid electrostatic effects.
▶ Do not vacuum up objects or materials that could cause injury by piercing through the dust bag (e.g.
pointed or sharp objects).
▶ Do not stand on the product (do not use it as a substitute for a ladder).
▶ Observe the accident prevention regulations applicable in your country.
This product is suitable for the following applications in commercial use:
• Vacuuming up small quantities of dust from Hilti diamond grinders, cut-off saws, rotary hammer drills
and core drilling machines using dry-cutting core bits.
• Vacuuming up oil and liquid media up to a temperature < 60 °C (140 °F).
• Wet and/or dry cleaning of wall and floor surfaces
*2330315*
1
2330315
Transport handle
@
Control switch
;
Holder for backpack (optional)
=
Suction head
%
Discharged-air outlet
&
Container cover latch
(
Waste material container
)
Intake fitting (suction hose)
+
Display and control panel
§
Blanking cover for wireless module (optional)
/
Battery compartment
:
Battery release button
∙
Battery status indicator
$
English 25