Sony VPL-PHZ51 Installationsanleitung Seite 32

Light source specifications
5.5 W laser diodes
× 24 (VPL-PHZ61)
× 18 (VPL-PHZ51)
Wavelength: 449 - 461 nm
Beam divergence angle from lens of this
unit
Laser emission port
Zoom maximum: α
67.6°
32
GB
Zoom minimum: α
45°
Precautions
On safety
Check that the operating voltage of your unit is

identical with the voltage of your local power
supply. If voltage adaptation is required, consult
with qualified Sony personnel.
Should any liquid or solid object fall into the

cabinet, unplug the unit and have it checked by
qualified Sony personnel before operating it
further.
Unplug the unit from the wall outlet if it is not to

be used for several days.
To disconnect the cord, pull it out by the plug.

Never pull the cord itself.
Never use a damaged AC power cord. A

damaged AC power cord can cause a short-
circuit, which may result in a fire or electric
shock.
The wall outlet should be near the unit and

easily accessible.
The unit is not disconnected from the AC power

source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
Do not look into the lens while in use.

When turning on the projector, make sure no

one is peeking at the projection lens.
Do not let children use the unit alone.

Do not place your hand or objects near the

ventilation holes — the air coming out is hot.
Be careful not to catch your fingers by the feet

(adjustable) when you adjust the height of the
unit. Do not push hard on the top of the unit
with the adjuster out.
Avoid using an extension cord with a low voltage

limited since it may cause the short-circuit and
physical incidents.
Do not catch your finger between the unit and

surface of the floor when moving the projector
installed on the floor.
Be careful not to catch your finger in the cooling

fan.
Do not install the unit in a location near heat

sources such as radiators or air ducts, or in a
place subject to direct sunlight, excessive dust or
humidity, mechanical vibration or shock.
If a user disassembles, repairs, or alters the unit,

it may cause a serious problem to the user's
safety.
If the projector malfunctions or is damaged,

consult with a qualified Sony personnel.