Activating/Deactivating The Timer Function; Cleaning/Maintenance; Cleaning - Silvercrest SLR 30 B1 Bedienungsanleitung Und Sicherheitshinweise

Ambient air quality
good
moderate
poor
'High': High fan speed and maximal air flow. The LED ring light (12) will illuminate.
•
'Low': Low fan speed and minimal air flow. The LED ring light (12) will illuminate.
•
'Sleep': Minimum fan speed, minimal air flow and minimal noise. The LED ring light (12) will not
•
illuminate. The ion function cannot be activated in this setting.

8.6 Activating/deactivating the timer function

The timer allows you to pre-set the air purifier's operating time to 1, 2, 4 or 8 hours. After the set time
elapses, the air purifier will automatically enter standby mode.
During operation, press the timer button
•
function and the desired length of operation. The time selected will illuminate on the control panel
(1) next to the timer button
To deactivate the timer, press the timer button
•
turns off.
The air purifier will retain all selected settings when it is switched off and resume those
settings when it is switched back on. When the air purifier is disconnected from the mains,
the settings that were previously selected will be lost.

9. Cleaning/maintenance

9.1 Cleaning

DANGER! Risk of electric shock!
Disconnect the air purifier from the mains before each cleaning.
Do not immerse the fan in water.
Do not allow any water or cleaning agent to enter the air purifier.
Only clean the air purifier using a clean, slightly damp cloth. Never use aggressive liquids.
•
Put some mild washing-up liquid on the damp cloth for stubborn stains.
•
The air outlet openings (5) and air inlet openings (7) should be cleaned regularly using a soft-
•
bristled brush in order to remove dust and soiling.
The particle sensor (11) is maintenance-free and does not need to be cleaned. To guarantee perfect
•
functionality, regularly remove dust and impurities from the opening in front of the particle sensor
(11) using a soft-bristled brush.
LED ring light indicator colours (12)
green
yellow
red
(2) once or multiple times to activate or deactivate the
(2).
(2) repeatedly until the operation time indicator
SilverCrest SLR 30 B1
Fan speed
minimum
low
high
English – 29