Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
intensity light, and it will be possible to proceed, also for this
area, to activation of the function; the function remains active
in the area where it has already been set, as indicated in the
Display (2)
Warming Function
Warming Function is a control function that allows the
maintaining of heat at a constant temperature, at an optimised
power level; ideal to keep ready-cooked foods warm. The
Warming Function is activated the first time the key
pressed
appears in the display (2) of the zone that is
The symbol
working in the Warming Function
Note: by selecting another cooking zone at the same time, the
symbol
(8) will return to being illuminated with a slight
intensity light, and it will be possible to proceed, also for this
area, to activation of the function; the function remains active
in the area where it has already been set, as indicated in the
Display (2)
• Press
(8) again to deactivate and switch off , until
bringing of the level shown in the Display (2) to "
Note: if there are several zones working in the Warming
Function, first select the desired zone using the Selection
zone (2) ;
the function can also be deactivated via the Selection Bar (3),
bringing the Power Level to "
Pause
The Pause function allows active functions on the cooktop to
be suspended, bringing the cooking power to zero.
Activation:
" (9)
• press "
• a flashing "
" is shown in the displays (2)
To deactivate the function:
(9) the Selection Bar (3) lights up
• press
press/slide on the Selection Bar (3) to deactivate the
•
function
Note: deactivation restores the conditions of the hob before
the pause; the hob continues to work with the same settings
previously set.
Note: if after 10 minutes thePause Function is not
deactivated, the hob switches off automatically.
Note: the Pause Function does not affect the extraction.
"STAND ALONE" Timer
The Timer function is a countdown independent of the cooking
zones (and the extraction zone).
The timer is activated by pressing the Zone/Display (4)
Use the symbols
Timer,which is displayed in the Zone/Display (4)
Note: wait 10 seconds without pressing any other command,
so that the countdown starts.
".
".
(5) to set the duration of the
The format of the Timer is .
- . for the times
-
for the minutes
Note: the timer can be set up to a maximum of 1h and 59min.
In the Zone/Display (4) the remaining time will be displayed;
at the end of the countdown, an acoustic signal will sound
Note: in the display of the countdown, for a time less than 10
minutes, the following format is evident
- . minutes
-
seconds
is
with fixed light point
To switch off the Timer:
• select Zone/Display (4)
• set the duration of the Timer to
Note: If timer is ON and the appliance is switched OFF, the
timer remain ON until it expires.
To reset the timer before, switch ON the appliance again, the
timer will switch OFF.
Cooking Zones Timer
The Cooking Timer Zone function is a countdown that can be
set, also at the same time, on each cooking zone
At the end of the period set, the cooking zones switch off
automatically and the user is notified with a dedicated acoustic
signal.
Activation of the cooking zone timer function
• Touch (press) the Selection/Display area (2) (power level
≠0)
(6) relating to the cooking zone
• Press
Use the symbols
Timer, which is displayed in the Zone/Display (4)
during setting the symbol
Note: wait 10 seconds without pressing any other command,
so that the Cooking Zone Timer will start.
Note: by pressing and holding
timer is reset
If desired, repeat the operation for several cooking zones.
Note : each cooking zone can have a separate Timer set; the
countdown for the selected cooking zone will be appear on the
display (4);
If no cooking zone is selected and the STAND-ALONE timer is
not active, the timer closest to the end of the countdown is
displayed.
If no cooking zone is selected and the STAND-ALONE timer is
active, it is displayed with priority, with respect to the timer
closest to the end of the countdown.
The display mode of the countdown is the same for the
"STAND-ALONE" Timer (see previous paragraph "STAND-
ALONE" Timer)
When the timer has finished the countdown, an acoustic
signal sounds and the cooking zone switches off.
To switch off the Timer:
• select the cooking zone (2)
• set the duration of the Timer to
92
(5)
, via
(5) to set the duration of the
(6) is flashing
(6) , the cooking zone
(5)
, using
Werbung
Inhaltsverzeichnis
