fm RX Serie Bedienungsanleitung Seite 53

7. Remove the socket head screws "1" and "2" and remove the hinges.
8. Remove the Allen head screws placed at positions "3" and "4".
9. Turn the door 180º
10. Place hinge "1" at position "4" and hinge "2" at position "3", assembly the door in the new position and tighten
the socket head screws.
11. Place the Allen head screws at positions "1" and "2".
12. Change the door micro "5" to the opposite side.
Note: Do not fully tighten the hinge screws until the door is appropriately adjusted in its position.
Ed.:21 – Ver.:01 – 01/01/2021
53