Quick Start - ECOVACS WINBOT W1 PRO Bedienungsanleitung

Quick Start

1
Connect WINBOT Power Cord, Power Adapter and Plug
Connect correctly in the order shown above. Improper connection may cause charging abnormalities or damage to the battery.
2
Preparation before Use
Fill Up the Reservoir
It is recommended to use with ECOVACS WINBOT Cleaning Solution.
The maximum volume of the Reservoir is about 60ml, and it can spray
for about 60 minutes when the Reservoir is full.
Note:
Do not add purified water and filtered water.
Do not add too much cleaning solution to overflow the Reservoir.
Using other cleaners could have an adverse effect on cleaning performance.
If the cleaning solution is used up, you can temporarily use tap water
instead. Using the ECOVACS WINBOT Cleaning Solution can have a
better cleaning performance.
8
EN
Step 1
OR
Step 2
Stick the Mopping Pad Onto WINBOT
1. For better cleaning performance, it is recommended to manually
wet the Mopping Pad and wring it out before usage.
2. Stick the Mopping Pad onto the Velcro at the bottom of WINBOT,
and press it with your hands to help the Mopping Pad stick firmly.
Narrow Side
Wide Wide
Side Side
Narrow Side