Quick Start - ECOVACS DEEBOT OZMO 930 Benutzerhandbuch

3. Operating and Programming

3.2 Quick Start

Remove the protection strip from the
robot's Bumper before use.
Docking Station Placement
1
Place the Docking Station on a level floor surface against the wall with the base perpendicular
to the ground. Keep the immediate area 1.5m (5') in front of the charger and 0.5m (1.6') on
both sides of the charger clear of objects and reflective surfaces.
Plug the Docking Station in.
* Do not change the location of the Docking Station once DEEBOT has scanned the
environment. If it is necessary to relocate Docking Station, power OFF DEEBOT and then
power back ON so DEEBOT can re-scan the environment. Alternatively, use the ECOVACS
App to direct the robot to rescan the environment.
12
EN