ECOVACS WINBOT W1 PRO Bedienungsanleitung Seite 9

Properly Tether WINBOT to a Safe Place
1
Note:
To ensure safety, please make sure to properly tether WINBOT to a safe
place before use.
It is recommended to fasten the Safety Tether with the Carabiner on a firm and
safe metal railing.
3
Start
Turn the Power Switch to "I ".
Method 1: Press the START button. After the fan is completely activated,
attach WINBOT to the window.
Method 2: Press the four side rollers onto the glass, and WINBOT will
automatically attach to the window.
WINBOT will start cleaning after it has attached to the window successfully.
* Do not stick the WINBOT too close to the edge when cleaning the frameless
glass. It is recommended to be more than 10cm away from the edge.
* WINBOT can only clean flat surfaces. Please make sure that the glass
thickness is not less than 3mm.
* Do not put the fan close to hair and other small objects after power on, so as
not to block the fan.
* For heavily stained glass, it is recommended to replace the Mopping Pad and
clean it for several times.
4
Pause
2
5
Finish
Remove WINBOT
9
EN