Transmitter; Battery Charging - XciteRC Runner 250 Bedienungsanleitung

Transmitter

EN
Manual Mode Indicator Light
Turning Left/Right Stick
Power ON/OFF
Buzzer speaker

Battery charging

WARNING: Be sure to read all safety instructions regarding the use of rechargeable batteries. Charging
may take place only with the supplied charger on a fireproof surface and under constant adult supervision -
fire or explosion hazard!
• Connect the power supply with the charger. The green LED lights up.
• Connect the batteries balancer wire with the charger.
• WARNING: The balancer connector is polarized. Check the side channels. Do not use force - fire
or explosion hazard!
• The red LED lights to indicate charging. Charging time is about 5 hours. If the battery is fully charged, the
red LED goes out.
• Unplug the battery from the charger and also the power supply from the jack.
The flight time of the Quadrocopter is about 15 minutes.
26
2.4GHz Antenna
Auxiliary channel 1
SWB Mode switch
0
Throttle
Trimmer
Auxiliary channel 2
SWA Mode switch
0
+ + Stable Mode Indicator Light
One key To Return Home Mode
Left side/Right side flying stick
Transmitter · Battery charging
Forward/Backward
Power indicator light
Low voltage indicator light
XciteRC Runner 250