9. TRANSMITTER CALIBRATION
Mode 2:
Push both sticks to the upper left corner and power on the transmitter simultaneously.
The LCD will display "H", rotate both sticks in circles for three times, then release both sticks,
press any trim for 1.5 seconds until one "Beep" heard which indicates a successful calibration.
Mode 1:
Push the left stick to the upper left corner and right stick to the upper right corner and
power on the transmitter simultaneously, The LCD will display "H", rotate both sticks in circles
for three times, then release both sticks, press any trim for 1.5 seconds until one "Beep" heard
which indicates a successful calibration.
!
The transmitter mode can be shifted according to the above operation.
13
©
2016 Hubsan