Introduction; Device Description (Fig. 1) - Scheppach ASP50-ES Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the us-
er to become familiar with the machine and take ad-
vantage of its application possibilities in accordance
with the recommendations.
The operating instructions contain important infor-
mation on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, costly
repairs, reduce downtimes and how to increase relia-
bility and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma-
chine and who are informed about the associated dan-
gers. The minimum age requirement must be complied
with.
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
country, the technical rules generally accepted for the
operation of machines of the same type must be ob-
served.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.

2. Device description (Fig. 1)

1. Handle
2. Machine head
3. Connection cable
4. Push grip
5. Locking hooks
6. Push grip mount
7. Drain hose stopper
8. Drain hose holder
9. Wheels (2x) with axle
10. Caster mounting base
11. Drain hose
12. Castors
13. Retaining clip for drain hose
14. Drain hose connection
15. Stainless steel container
16. Suction connection
17. Socket with auto switch-on device
18. On/off switch
19. Connection for blower function
20. Filter basket with safety float valve
21. 3m suction hose
22. Foam filter
23. Paper filter bag
24. Folded filter
25. Floor nozzle
26. Joint nozzle
27. Metal extension tube
28. Handle screw (2x)
29. Screws for wheel axle fastening (2x)
www.scheppach.com GB | 19