Product Description; Construction; Function - Balluff BIR 01 K12LL3-000S04 Serie Betriebsanleitung

BIR 01- _ _ _ _ -K12LL3-000S04
Inductive Rapid Positioning System
4

Product description

16 27
2)
13.3 23.2
~80
Mounting clamps
BTL6-A-MF07-A-PF/M5
Fig. 4-1: Dimensions, design and function
4.1

Construction

Electrical connection: The electrical connection is made
via a connector (see Type code on page 22).
Housing: Housing containing the processing electronics.
Target: Defines the position to be measured. Targets are
available in various models and must be ordered
separately (see Accessories on page 19).
Measuring length: Defines the travel/length range
available. Position measuring systems with the following
measuring lengths are available: 200, 300, 500 and
600 mm. Other measuring lengths in 100 mm increments
are available on request.
8 english
Measuring length
Target BAM TG-IR-036-A
1)
~250 ~250
1)
15
26
2)
13.8 2.8
~80
not included in scope of delivery
1)
unusable area
2)
4.2

Function

To determine the position of a system component, a target
is connected to the component directly or indirectly
depending on the type and moved along the sensor. The
position of the system component is determined parallel to
the position monitoring of the target.
In the BIR inductive rapid positioning system there is a
transmitter/receiver sensor element, protected by an
extruded section made of aluminum and a very resistant
plastic (PBT).
The target contains a resonant circuit and is inductively
coupled to the BIR.
LED
LED
35
50
68