Startup And Operation; Startup; Operating Notes; Maintenance - Balluff BIR 01 K12LL3-000S04 Serie Betriebsanleitung

BIR 01- _ _ _ _ -K12LL3-000S04
Inductive Rapid Positioning System
6

Startup and operation

6.1

Startup

Uncontrolled system movement
When starting up, if the BIR is part of a closed loop
system whose parameters have not yet been set, the
system may perform uncontrolled movements. This
could result in personal injury and equipment damage.
► Persons must keep away from the system's
hazardous zones.
► Startup must be performed only by trained technical
personnel.
► Observe the safety instructions of the equipment or
system manufacturer.
1. Check connections for tightness and correct polarity.
Replace damaged connections.
2. Turn on the system.
3. Check measured values and adjustable parameters
and readjust the BIR if necessary. Check spacing over
the entire measuring range.
Check for the correct values, especially after
replacing the BIR or after repair by the
manufacturer.
6.2

Operating notes

– Regularly check function of the BIR and all associated
components.
– Take the BIR out of operation whenever there is a
malfunction.
– Secure the system against unauthorized use.
– Check fasteners and retighten if needed.
6.3

Maintenance

The product is maintenance-free.
14 english
DANGER