Checking The Weighing Platform; Important Notes; Installation, Configuration, Service And Repair - Mettler Toledo PBD655 Bedienungsanleitung

Digitale wägebrücken

Vorschau ausblenden Andere Handbücher für PBD655:

Inhaltsverzeichnis

Verfügbare Sprachen

0.000 kg

10.520 kg

0.000 kg

Installation and Operation

3.4 Checking the weighing platform

Function check

Before starting a weighing series, perform a function check of the weighing platform and

the connected weighing terminal.

1. Make sure that the weighing platform is connected to a weighing terminal and that the

weighing terminal is switched on.

2. Make sure that the weighing platform is unloaded and the display of the weighing

terminal shows 0.

3. Load the weighing platform.

The display must show a value different from 0.

4. Unload the weighing platform.

The display must return to 0.

Verification test

For a verification test refer to the User manual of the connected weighing terminal.

If the verification seal is broken, verification is no longer valid.

For best weighing results observe the following:

▲ To achieve best weighing results, always place the weighing sample on the same

position on the scale.

▲ Avoid abrasive and wear processes.

▲ Avoid falling loads, shocks and lateral impacts.

➜ For installation, configuration, service and repair of the weighing platforms call the

METTLER TOLEDO Service.

PBD655 30303671A

Inhaltsverzeichnis