Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.COUNT/MIN(RPM)：Automatically accumulates the workout counts per minute.
8. PULSE: Press MODE button until "PULSE" appears. Before measuring your
pulse rate, please place your palms of your hands on Both of your contact pads and
the monitor will show your current heart beat rate in beats per minute(BPM) on the
LCD after 6~7 seconds. (Electronic watch with wireless heartbeat can be used to
test the heart rate after wearing the wireless heartbeat band.)
Remark: During the process of pulse measurement, because of the contact
jamming, the measurement value may be higher than the virtual pulse rate during
the first 2~3 seconds, then will return to normal level. The measurement value can
not be regarded as the basis of medical treatment.
Press "MODE" button until "PULSE" appears. Press "SET" button to set exercise
pulse. The setting values of 40-240 RPM , the consumer computer alarm when
heart rate is above the SET value.
NOTE：
1. If the display is faint or shows no figures ,please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4
minutes .
SPECIFICATIONS:
AUTO SCAN
TIME
COUNT
TRIP DISTANCE
FUNCTI
CALORIES
ON
ODOMETER
RPM
PULSE RATE
BATTERY TYPE
OPERATING TEMPERATURE
STORAGE TEMPERATURE
Every 6 seconds
0:00~99:59
0~9999TIMES
0~9999 METER
0.0~999.9 CAL
0~9999 METER
0~999 TIMES/MIN
40~240 BPM
2pcs of SIZE –AAA or UM –4
0°C ~ +40°C
-10°C ~ +60°C
7
Werbung
Inhaltsverzeichnis
