Computer Instructions; Functional Buttons - Merax NS-901RE Gebrauchsanweisung

FUNCTIONAL BUTTONS:

MODE - Push down for selecting functions.
SET - To Set the consumer movement of time、count、distance、calories and
pulse.
RESET -For resetting consumer movement of time、count、distance、calories
and pulse.
FUNCTION AND OPERATIONS:
1.SCAN: Press "MODE" button until "SCAN" appears, monitor will
rotate through all the 7 functions: Time、count、distance、calorie、odometer、
RPM and pulse. Each display will be hold 6 seconds.
2.TIME: (1) Count the total time from exercise start to end.
(2) Press "MODE" button until "TIME" appears, press "SET" button to set exercise
time. When the "set" is zero, the computer will alarm 5 seconds.
3.COUNT: (1) Count the count from exercise start to end.
(2) Press "MODE" button until "CNT" appears, press "SET" button to set exercise
count. When the "set" is zero, the computer will alarm 5 seconds.
4.DISTANCE: (1) Count the distance from exercise start to end.
(2) Press "MODE" button until "DIST" appears. Press "SET" button to set
exercise distance.
5.CALORIES: (1) Count the total calories from exercise start to end.
(2) Press "MODE" button unit "CAL" appears. Press "SET" button to set exercise
calories. When the "set" is zero, the computer will alarm 5 seconds.
6. ODOMETER：Monitor will display the total accumulated distance.

Computer Instructions

When the "set" is zero, the computer will alarm 5 seconds.
6