Activating The Window Sensing Mode; Resetting The Window Sensing Mode; Deactivating The Window Sensing Mode; Using The Towel Rack - Sygonix 2525295 Bedienungsanleitung

11.8.1 Activating the window sensing mode

Preconditions:
a
The heater is operating.
1. Touch the button WINDOW.
à
The symbol WINDOW flashes on the display.
à
If an open window is sensed, the heater stops heating.

11.8.2 Resetting the window sensing mode

To continue heating after an open window was sensed you need to reset the open window mode.
1. Close the window.
2. Touch the button WINDOW.
à
The symbol WINDOW flashes on the display.
à
You have reset the open window sensing mode. The mode is activated again.

11.8.3 Deactivating the window sensing mode

1. Touch the button WINDOW.
à
The symbol WINDOW disappears from the display.
à
The heater will no longer sense open windows.

11.9 Using the towel rack

With the towel rack you can heat and dry towels.
Important:
When you use the towel rack, make sure the towels do not cover the heat outlet of the heater.

11.10 Overheat protection

If the heater becomes too hot, the overheat protection will turn the heater off. You can reset the heater to operate it
again.
To reset the heater:
1. Flip the main switch into the position 0.
2. Let the heater cool down to room temperature.
3. Remove any visible causes (example: a towel covering the heat outlet).
4. Flip the main switch into the position 1.
5. Switch the heater on.
à
The heater is ready for operating again.
Important:
If the heater does not switch back on or the heater keeps on switching off, have the heater checked by a profes-
sional.
36