Operation; Managing The Power Supply; Switching The Heater On And Off; Setting Weekday And Time - Sygonix 2525295 Bedienungsanleitung

11 Operation

You can operate the heater in different modes that suit your needs.
Manual mode:
With the manual mode, you are in charge of setting room temperature and heating power. In manual mode you can
also set countdown timers.
Full day anti-frost mode:
The anti-frost mode maintains the room temperature at 5 °C to prevent frost.
Custom program mode:
Custom programs divide every weekday into distinct programmable time periods of user-defined duration. For each
period, you can set to operate the heater in comfort (default: 24 °C) or anti-frost (5 °C) working mode. Once you
have programmed a custom program it is stored in memory and you can activate the program at any time.

11.1 Managing the power supply

The heater is equipped with a main switch to connect and disconnect the power supply.
Connecting the power supply
1. Connect the mains cable to the mains supply.
2. Flip the main switch to the position I.
à
An audible sound is emitted.
à
After 3 seconds, the heater enters the standby mode.
à
The heater is ready for use.
Disconnecting the power supply
1. Flip the main switch to the position 0.
2. Disconnect the mains cable from the mains supply.

11.2 Switching the heater on and off

After the heater is connected to the mains supply you can switch the heater on and off via the touch panel.
Preconditions:
a
Main switch is in the position I.
1. Touch the power button ON/OFF to switch the heater on.
à
The heater starts heating.
à The display shows the set temperature.
2. Touch the power button ON/OFF to switch the heater off.
à
The fan continues to run for 30 seconds to cool the internals.

11.3 Setting weekday and time

By setting the weekday and time, you will align the heater clock to the weekday and time settings of your location.
This is important so that you can make use of the pre-set modes and custom programs.
Preconditions:
a
The heater is operating.
32