Display; Installation - Sygonix 2525295 Bedienungsanleitung

9.2 Display

G
Display symbol
A HEAT
B FROST
C TIME
D WINDOW
E TIMER
F PROG
G WEEKDAY

10 Installation

Before operation, the heater must be mounted to a wall in a vertical position. The installation location must comply
with the locally applicable regulations.
Important:
If you are in any doubt, do not carry out the installation yourself; ask a qualified person to do it for you.
Important:
In order to avoid a hazard for very young children, install the heater and towel rack so that the lowest heated rail
of the towel rack is at least 600 mm above the floor.
1. Refer to the installation diagrams at the front of these operating instructions.
2. Check that the installation location for the heater meets the requirements shown in figures [A] and [B].
3. Follow the figures [1] to [8] to install the heater and towel rack. Figure [9] shows the installed heater with towel
rack.
A
B
C
D
E
F
Symbol indicates
One symbol: Heater operates at medium power (1000 W)
Two symbols: Heater operates at full power (2000 W)
Anti-frost working mode is activated
Time display
The open window sensing mode is activated.
An open window was sensed.
A timer is set.
Custom program mode is activated.
M=Monday, T=Tuesday, ..., T=Thursday, ..., S = Sunday
31