Changing The Light - Kuppersberg Rfcn 2011 Technischer Pass

ENGLISH
7) Place the refrigerator door on the
middle hinge and install the top hinge,
connect the signal circuit terminal (4) to
the terminal (1). Connect the signal cir-
cuit terminal (2) to terminal (3).
Hinge cover

2.4 Changing the Light

Light source in this product is replaceable only by qualified engineers.
Light source in this product is replaceable only by qualified engineers.
Light source in this product is replaceable only by qualified engineers.
Light source in this product is replaceable only by qualified engineers.
Light source in this product is replaceable only by qualified engineers.
Any replacement or maintenance of the LED lamps
Any replacement or maintenance of the LED lamp s is intended
is intended to be made by the manufacturer, its
to be made by the manufacturer,its service agent or similar
service agent or similar qualified person.
qualified person.
Light source in this product is replaceable
Any replacement or maintenance of the LED lamp s is intended Any replacement or maintenance of the LED lamp s is intended
only by qualified engineers.
to be made by the manufacturer,its service agent or similar
to be made by the manufacturer,its service agent or similar
Any replacement or maintenance of the LED lamp s is intended
Any replacement or maintenance of the LED lamp s is intended
qualified person. qualified person.
to be made by the manufacturer,its service agent or similar
to be made by the manufacturer,its service agent or similar
1. Please take out the
qualified person.
qualified person.
plug before removal.
3. Take down the lamp
panel.
1. Please take out the
1. Please take out the 1. Please take out the
plug before removal.
plug before removal.
plug before removal.
1. Please take out the
1. Please take out the
plug before removal.
plug before removal.
3. Take down the lamp 3. Take down the lamp
panel.
panel.
3. Take down the lamp 3. Take down the lamp
3. Take down the lamp
panel.
panel. panel.
TECHNICAL PASSPORT
Refrigerators & Freezers
Replace the top hinge cover and
plugs. For the assembly of handle,
please refer to chapter 2.2.
2. Remove the lampshade with 2. Remove the lampshade with
a screwdriver.
2. Remove the lampshade with
2. Remove the lampshade with
a screwdriver.
4. Remove the connection 4. Remove the connection
terminal.
4. Remove the connection
4. Remove the connection
terminal.
Hole cover
2. Remove the lampshade with
a screwdriver.
4. Remove the connection
2. Remove the lamp- terminal.
shade with a screw-
a screwdriver.
driver.
a screwdriver.
terminal.
4. Remove the connec-
terminal.
tion terminal.
43